T3 Turbo Blanket

T3 Turbo Blanket

T25/T28 Turbo Blanket

PTP Turbo Blankets isolate the heat produced by your turbocharger with the purpose of reducing turbo lag, cooler air intake temperatures, protecting and prolonging vital under hood components (up to 60% under hood heat reduction), and giving a boost in horsepower.

In keeping the exhaust gases within the turbocharger hot, turbocharger efficiency is improved. Also by keeping the heat of the exhaust gases contained within the hot side of the turbocharger and away from the cool side of the turbocharger and the intake path, more oxygen per unit volume reaches the engine, and thus, more power can be achieved.

The PTP Lava Turbo Blankets are constructed with an outer layer made from pulverized volcanic lava rock (Rated 1800°F Direct Heat / 2500°F Radiant Heat) formed into fabric and woven into a tight mesh weave, these turbo blankets are internally insulated with high temperature calcium magnesium silicate wool (Rated 1832°F Continuous / 2300°F Peak) overlaid with a high temperature stainless steel mesh for increased durability and improved thermal resistance. The Lava Turbo Blankets are designed to withstand the harshest of conditions.

Every PTP Turbo Blanket is hand-crafted in North America, and quality is guaranteed. PTP Turbo Blankets is well known in the heat insulation industry for its high standards for material selection, design, and construction. Our materials are on the cutting edge of heat insulation technology. With the growing amount of imitation turbo blankets on the market, it's important to note many of them are manufactured using inferior materials for construction. Imitation turbo blankets can be ineffective, or worse, they can be dangerous if flammable materials are used.

What's In The Box?
Lava T3 Turbo Blanket
Choice of Stainless Steel Wire or Stainless Steel Springs (Pair)
Warranty Card
PTP Turbo Blankets Sticker

Other  PTP Turbo Blankets Products available for any chassis/engine - if you don't see what you’re looking for please message us directly.
We shop our competition - if you find a lower comparable price we will match or beat it - message for details!
PROPOSITION 65 WARNING: These products may contain chemicals known to the State of California to cause birth defects or other reproductive harm. For more information visit www.P65Warning.ca.gov

About

PTP Turbo Blankets is one of the leading suppliers of turbo blankets and exhaust wraps in the country, appealing to both street and race performance enthusiasts. We at PTP strive to serve the worldwide marketplace with performance enhancement products for automotive, motorcycle, marine, and off-road applications with high quality turbo blankets and heat wraps that reflect our many years of experience in research and development and our strong drive for excellence.

Our story at PTP (ProTech Performance) dates back to October 1996 when we were established as the first import performance shop in Austin, Texas. We started the business, building rotary engines for high performance applications. Since then, we have expanded to provide repair and performance enhancements to all import vehicles. In early 2000, PTP began research & development on custom products for vehicles to help with efficiency and performance. In 2004, PTP created the first turbo kit for the Mazda RX-8, and it was featured in Car & Driver Magazine. (Click here to read the article http://www.caranddriver.com/reviews/protech-performance-rx-8-turbo-specialty-file) During the development of our turbo kit, we created a custom heat shield, which was designed to help hold heat within the exhaust impeller casing of the turbocharger. Building upon this design, we came up with the idea for the turbo blanket, and we started to develop a prototype. After testing our new prototype and observing incredible results, we decided to mass produce our turbo blanket for the popular universal T3, T3/T4 and T6 turbo sizes.