HKS Other Cooling Kits Cooling Series (MITSUBISHI)

OTHER COOLING KITS COOLING Series (MITSUBISHI)

Description

Cooling kits for specific vehicles and cooling kits for other fluids

Details

SST FLUID COOLER CZ4A EVOX

SST FLUID COOLER KIT

"Failsafe mode problem due to excessive SST fluid temperature" is the weak point of LANCER EVOLUTION X SST for sport driving. HKS SST Fluid Cooler Kit was developed to solve this problem.

The HKS SST Oil Cooler Kit Mitsubishi Lancer Evolution X CZ4A delivers great performance under extreme temperatures and hard driving when your engine needs it the most. This will contribute to extending the amount of driving your CZ4A which will be able to do before activating Failsafe Mode due to the transmission overheating.
HKS released SST Oil Cooler Kit to assist in increasing the performance of engine oil. The Oil Cooler Kit helps prolong the life of internal engine components. Aggressive driving causes higher engine temperatures. Factory oil coolers are normally small water-cooled devices sandwiched between the oil filter and engine block. These are big load for the cooling system even under normal driving conditions. The new kit also offers an enhancement of thermostat to give quick engine warm up.

Performance

Stock car is in safe mode after 10 minutes of driving due to excessive oil temperature. It took HKS SST OIL COOLER KIT installed car twice as long as to reach the temperature to enter the safe mode. A driver can concentrate on driving without concerning for the failsafe mode.

Kit Parts
SST Fluid Pump
Fittings
Air-cooled Core (W32 9 rows)
Brackets
Hoses
Bolts, etc.

Data

In-house test results show that there was not big difference of oil temperature between a stock core and large core. Even adding a cooling fan did not show any improvement. However, HKS' original cooling system did significantly lower the oil temperature. HKS SST Fluid Cooler Kit is a must item for sporty driving with Lancer Evolution equipped with the SST.

Note for Installation
Slight modification to the resin parts is required.
Factory fog lights can be used together.
HKS Intercooler can be used together.

Required Parts
SST Oil 7L (Mitsubishi Factory SSTF-I) P/N: C0002610 (4L)
2m wire (AV2.00sq / Conductor Max. Capable Temp: 80℃+)
ON-OFF Switch 1 pc.
Relay 1 pc. (Operation Voltage: approx. 200W)
Fuse Holder 1pc. (Capable Current: approx. 15A)
Connector Terminals

Other HKS Products available for any chassis/engine - if you don't see what you’re looking for please message us directly. We shop our competition - if you find a lower comparable price we will match or beat it - message for details!

PROPOSITION 65 WARNING: These products may contain chemicals known to the State of California to cause birth defects or other reproductive harm. For more information visit www.P65Warning.ca.gov

About

In October 1973, two talented and spirited young engineers had a vision; to design and build high performance engines and components that major OE manufacturers could not or would not produce.
Led by Hiroyuki Hasegawa, a former engineer for Yamaha Motor Company, and his partner Mr.Kitagawa, the two secured a capital infusion from Sigma Automotive Co., Ltd. (hence the name “HKS ”), and began tuning gasoline powered engines in a dairy-farming shed at the foot of Mount Fuji in Japan.
A year later, Mr. Hasegawa designed and built the first aftermarket turbocharger for passenger cars and has never looked back.
HKS pioneered the Japanese aftermarket performance industry by delivering a host of exciting new products, including the first commercially available electronic turbo timer and boost controller. Other early products included piggy-back fuel computers and sophisticated fuel management tools. Clearly HKS was Driving Performance trends for Japanese vehicles.