Evans NPG Waterless Coolant

NPG WATERLESS COOLANT

For tracks or in series where propylene glycol-based coolants are allowed.

Product Information
Evans NPG waterless coolant, available in a half-gallon bottle, is recommended for racing engines that run on tracks or in series where propylene glycol-based coolants are allowed but there is a “No Ethylene Glycol” rule. NPG can be used in high performance street vehicles with high flow cooling systems, as well as for food service equipment where ethylene glycol products are contraindicated. NPG is not recommended for daily drivers or cold weather operation, and may require system modifications to ensure a successful conversion.

Engine Types
Motorcycles
Drag racing
Circle Tracks
Boats
Usage
Evans NPG coolant is ready to use—no water required. It contains no silicates or phosphates and requires no Supplemental Coolant Additive (SCA).

Boiling Point: Above 375°
Antifreeze Properties: Protects below -40°F
Benefits: Reduces system pressure, prevents overheating, maximizes BHP, provides unbeatable protection against corrosion and electrolysis
Life Span: Protects for the life of the engine

Installation
To ensure success using Evans NPG coolant, follow the recommended installation procedure. Evans recommends that Prep Fluid be used to purge the system after draining out the old coolant.

Other Evans Cooling Products available for any chassis/engine - if you don't see what you’re looking for please message us directly.
We shop our competition - if you find a lower comparable price we will match or beat it - message for details!
PROPOSITION 65 WARNING: These products may contain chemicals known to the State of California to cause birth defects or other reproductive harm. For more information visit www.P65Warning.ca.gov

About

Water-based antifreezes have been used in car engines for about a century, but water can cause major problems inside engines, including corrosion, boil-over, and engine breakdowns. Waterless coolants can prevent engine overheating and reduce cooling system maintenance, and can last much longer than a water-based coolant.

Most engine coolants/antifreezes are a 50/50 mix of ethylene glycol and water. Waterless coolant is a glycol-based fluid that is ready to use, no water required.
Water has superior heat transfer capabilities but water’s low boiling point is close to the operating temperature of an engine, and water can cause corrosion.
Waterless coolants provide sufficient heat transfer, boil at a higher temperature, and are non-corrosive.
Evans is the only manufacturer of waterless antifreeze.
Installing Evans waterless coolant eliminates many problems associated with water in conventional water-based cooling systems, while increasing reliability and engine life.