Grams Performance Fuel Injector Set - VQDE & VQHR (Select Flow Rate)

Grams Performance Fuel Injector Set - VQDE & VQHR

(Select Flow Rate)

Grams Performance is proud to offer the most innovative high-performance fuel injectors for today's performance vehicles. Premium materials, advanced manufacturing techniques, and stringent quality control procedures make Grams Performance the leader in high-performance fuel injectors.

An engine's fuel injectors perform a vital role in the accurate metering and atomization of fuel. Grams Performance accomplishes this with its high-impedance Bosch EV14 fuel injectors that are modified for high-performance use. Each injector is individually balanced, flow tested, and dynamically matched for characterization within one percent of each other.

The EV14 injector's superior ball/pintle valves combine with Grams Performance precision-modified nozzles allow for consistent performance up to 118 psi, making them suitable for a wide range of applications, yet without exhibiting any of the high-pressure problems often associated with other injectors. The optimized spray pattern also helps improve mixture preparation as well as atomization. Grams Performance injectors are cold cut with diamond grinders in less than three seconds for high performance with pre-seating. Abrasive cutting creates heat, which leads to poor spray patterns and the need for competitors to pre-seat their injectors to reduce distortion. Each injector is also fitted with high-quality Viton O-rings that are resistant to extreme temperatures and harmful oils found in some fuels.

Each injector set includes dead time compensation values to help ensure consistent air/fuel ratios and optimal performance when tuning. Grams Performance Fuel Injectors are carefully tested and matched in controlled laboratory environments using state-of-the-art equipment and are subjected to rigorous dyno, street, and racetrack testing to ensure proper performance in the most extreme

550cc/min Injector Set 
- 550cc @ 3 Bar 
- High-impedance design (no resistor box required)
- Cold-machined tips for high-precision operation
- Ultra-fast solenoids for precise fuel metering
- Linear response across wide range of operating conditions
- All injectors balanced, blueprinted, and matched within one percent
- Compatible with all known fuels including gasoline, methanol, and ethanol
- Unmatched cylinder-to-cylinder consistency and optimal idle quality

1000cc/min Injector Set
- 1000cc @ 3 Bar
- High-impedance design (no resistor box required)
- Cold-machined tips for high-precision operation
- Ultra-fast solenoids for precise fuel metering
- Linear response across wide range of operating conditions
- All injectors balanced, blueprinted, and matched within one percent
- Compatible with all known fuels including gasoline, methanol, and ethanol
- Unmatched cylinder-to-cylinder consistency and optimal idle quality

1150cc/min Injector Set
- 1050cc @ 3 Bar
- High-impedance design (no resistor box required)
- Made from Bosch® EV1/EV6 Standard housing
- Stainless internals
- Compatible with all fuels including oxygenated fuel with MTBE such as Q16, M5, C45
- Ultra-fast solenoids for precise fuel metering
- Linear response across wide range of operating conditions
- All injectors are flow matched sets
- Compatible with all known fuels including gasoline, methanol, and ethanol
- Unmatched cylinder-to-cylinder consistency and optimal idle quality 

Grams Performance is proud to offer the most innovative high-performance fuel injectors for today's performance vehicles. Premium materials, advanced manufacturing techniques, and stringent quality control procedures make Grams Performance the leader in high-performance fuel injectors.

An engine's fuel injectors perform a vital role in the accurate metering and atomization of fuel. Grams Performance accomplishes this with its high-impedance Bosch EV14 fuel injectors that are modified for high-performance use. Each injector is individually balanced, flow tested, and dynamically matched for characterization within one percent of each other.

The EV14 injector's superior ball/pintle valves combine with Grams Performance precision-modified nozzles allow for consistent performance up to 118 psi, making them suitable for a wide range of applications, yet without exhibiting any of the high-pressure problems often associated with other injectors. The optimized spray pattern also helps improve mixture preparation as well as atomization. Grams Performance injectors are cold cut with diamond grinders in less than three seconds for high performance with pre-seating. Abrasive cutting creates heat, which leads to poor spray patterns and the need for competitors to pre-seat their injectors to reduce distortion. Each injector is also fitted with high-quality Viton O-rings that are resistant to extreme temperatures and harmful oils found in some fuels.

Each injector set includes dead time compensation values to help ensure consistent air/fuel ratios and optimal performance when tuning. Grams Performance Fuel Injectors are carefully tested and matched in controlled laboratory environments using state-of-the-art equipment and are subjected to rigorous dyno, street, and racetrack testing to ensure proper performance in the most extreme conditions.

About Grams Performance:

Grams Performance and Design’s products are planned and designed in-house using the latest computer simulation and modeling techniques, followed by careful testing in controlled laboratory environments using state-of-the-art equipment. Each product is then subjected to rigorous dyno, street, and race track testing to ensure proper performance in the most extreme conditions. For these reasons, top street cars and race cars worldwide rely on Grams Performance products.

Other Grams Performance Products available for any chassis/engine - if you don't see what you’re looking for please message us directly.

We shop our competition - if you find a lower comparable price we will match or beat it - message for details!